Your garage door does more than just providing access to your garage. It provides an amazing level of utility, enhances the curb appeal and increases the value of your home. But that can only be true if it’s well maintained and updated.

If your garage door is throwing off your home’s design, inconveniencing your operation, or simply not up to standard, it might be time to replace it. Here are top 5 signs you should get rid of your old garage door.

1. Noise level

Sometimes increased noise levels might just mean certain garage door parts need replacement or repair. However, you should not ignore these noises, because they’re more than just an inconvenience. A garage door in its proper working condition should run smoothly with minimal noise. If your door develops sudden new sounds in form of grating, squeaking, banging and grinding, it’s a clear sign you need to replace it.  

A common factor that can cause for increase noise is unlevel track.  Over time it’s possible that your garage door could fall off track and require repair.

2. Sagging

Roswell GA Garage Door Replacement and Repair

Sagging can be a really big issue, especially with wooden garage doors. If a wooden door is not well maintained, it can sag from decomposition, rot and overall deterioration. And even if your door is not wooden, any garage door showing signs of sagging means there is a major serious underlying issue. It’s recommended that you talk to Garage door installation and repair professionals to have a new door installed is you it shows noticeable signs of sagging.

3. Safety and security

Garage doors are known to cause injuries and sometimes even death if they shut unexpectedly. If your door doesn’t close the whole way, or the automatic reverse mechanism isn’t being triggered as it should be, it’s dangerous and may require garage door maintenance services. These issues can hurt your loved ones and pets, as well as damage your home and leave it exposed to anyone determined to break in.

4. Aged Design

A vintage, old-fashioned or antique design is nice if it matches the overall design and looks of the rest of your home. However, if your garage door has been beaten up by weather elements over the years and now it simply looks outdated rather than classic, it’s time to replace it. Doors generally fall apart, fade or rust, and this makes your home look bad, considering it’s one of the largest features on your house. Replace your old garage door with a modern, new design to upgrade the look of your house.

5. Repeated Breakdowns

Occasional garage door breakdowns are normal and can easily be fixed by garage door repair experts. However, should you notice repeated breakdown from abuse, age or normal wear and tear, start thinking about replacing the door. Instead of spending money on constant repairs, think about diverting it towards a new garage door installation. If you decide to stick with your old troublesome door, soon or later the cost of repair will outweigh the cost of buying a new door.

Bottom line

If you notice any of the above-mentioned signs with your garage door, do not make assumptions or ignore them. Call in professional garage door experts to thoroughly inspect every component. If you decide a new garage door installation is the way to go, do so as soon as your time and budget can allow in order to prevent any potential accidents and injuries.

The best way to set a budget for home renovation is to work out what you want and then how much it’s going to cost you. Sometimes it is not worth to go for the extra cheap option as it may make you lose out heavily.Busting the budget is everyone’s biggest fear when it comes to renovation.  To make sure you’re getting bang for buck, you need to know how your money is best spent, from the design and building work to managing your finances cleverly. Here are some of the tips on how to plan your budget in a pocket friendly manner.

Efficiency optimisation

If you can reorganize and equip your kitchen for maximum utility, you may not need to blow out the walls to gain square footage. This would increase your budget and on the contrary some minor organisation would serve the purpose without costing too much.

Meticulous planning

Budget successes start with effective planning. The best way to keep under budget is by making sure you plan out every detail before the actual construction process goes underway. This means picking out every material down to the texture and color. Don’t keep any task for a later date as it would only exacerbate your problems. Consult a renovation company to make your task easier and better planned.

 

Budget your additional expenses

Don’t forget to allow room in your budget for things besides just the construction part of the remodel. For example You may find yourself wanting to order take out more often if your kitchen is the renovation focus.

Look for exact price quotes
When working with your designer and contractor, make sure you know the full cost of everything, and ask about applicable taxes. Ask for a detailed breakdown, if there are better grades that would cost extra, and if there are any additional fees like delivery.

Reuse old materials

Many renovation projects involve the demolition of old buildings. Reusing the original bricks offers huge savings. Likewise, reusing roof tiles and slates in sound condition will not only save you money, but will also help your new additions to blend in with the old. Things that can be reused would save you a lot of money.

Keep a track of expenses

Just because you’ve planned everything out ahead of time and have a detailed budget, it doesn’t mean that you won’t go over if you’re not careful. Keep track of all of your expenses as you go so that you know what you’ve spent in relation to your budget at all times. This will help you stay on top of the details before things get out of control. Some home renovators would give you a detailed breakup that would help you in planning things ahead of time.

Do-it-yourself

Sometimes you can do some of the work yourself in order to have more money to spend on other aspects of your project. Even if you’re not handy, you can clean up the work area at the end of the day. Many construction teams will clean up the site after the day is over, but will charge their clients for doing this. If you find yourself starting to max out your budget, you can save a little bit of money by doing the clean up on your own.

Combine projects wherever possible

Space out smaller projects that could be done at the same time. For example, if you’re replacing both your kitchen floors and your dining room floors with hardwood, you might as well do them at the same time. This will save you money, since doing everything at once will be more efficient and therefore less costly.

A little bit of research and  planning goes a long way when renovating your house on a budget. This will help you completion of your task saving you that extra buck.  

Spray-painting your furniture instead of going the regular paintbrush routine is not as bad as it seems, especially when you’re planning to save time on your upcoming home improvement projects. And unlike regular paint, spray paint quickly dries, plus you can get rid of any revealing brushstroke marks.

Once you learn the technique of spray-painting, you can update just about any furniture piece without going broke. Tough paintbrush and a bucket of paint look like the best choice, but you may end up with visible brushstrokes and more likely be stuck preparing those multiple coats.

Don’t let the spray paint threaten you since getting the smooth finish that you want for your old furnishings is more comfortable with this stuff. Below are the things to consider about spray-painting any types of furniture.

Purchase the Necessary Materials

Purchase all the supplies you need to guarantee that you can finish your job task without going another trip to the market. You will need sandpaper, a mask, spray paint, a sealer, and a  primer depending on the plan. Additionally, don’t get tempted to purchase the generic or cheap brands of spray paint.

Like other regular paint, spray paints have various finish options, from the high gloss to flat finish. Thus, be sure to pick the finish to match your needs. For furnishings, the greater the gloss, the easier it will clean. If you have high-use furniture, avoid those flat paints. Gloss or satin finishes will work best for any projects.

If you have a massive project, you can do yourself a favor and buy a spray paint handle. It will protect your finger from pains and aches and makes the job a quicker.

Do the Preparation

After purchasing all the needed materials, see to it that your pieces of furniture are clean and free of loose cracks or parts. Fix any structural damages and tighten any loose bolts, so the piece is firm and sturdy. For best finishes, it is essential to sand your furniture first.

Depending on the result, you may need a medium to a high-grit piece of sandpaper. Sand the parts thoroughly, spending distinct attention to any discrepancies or any rough surfaces.

If you are coating over a furniture piece with a smooth, shiny finish, you will need to get that result as best as you can. And once you completed the sanding, wipe it with a wet fabric to free all the dust and small particles from the piece.

Pick The Right Place

You should do your spray-painting task in a well-ventilated space and remember to wear a mask to avoid inhaling paint particles. Also, you can go outdoors, but do it when the weather of the day is neither too hot nor too cold, since that may create a bubbly result.

Furthermore, avoid painting during a windy day. You will not only blow your paint off into the breeze, but there is a risk of having bits of dust to go onto your wet project. Thus, it is important to cover the surfaces that you are avoiding to get paint on because spray paint can easily travel.

Prepare the Primer

After setting the place and all the things needed, it’s time for you to prime the furniture items. Wood furniture needs two coats of primer before proceeding. Scatter the primer in light coats onto the furniture and secure the complete coverage. Then, let it completely dry before applying the spray paint. Putting primer first is essential to bring out a glossy and smooth overall finish.

But remember that many paints and primers and have harsh fumes and chemicals. So make sure to wear protective equipment and take steps to guarantee proper air-conditioning such as a ventilation fan, open the windows, and use respirators or face masks.

Time for Spray-painting

After applying the primer to the desired furniture now is the time to begin applying the spray paint. Start painting using even and long strokes. Remember not to keep the paint close to the furniture, or you may get marks or rings of fortified paint.

Like the primer, don’t mask it all using the first coating. The second coat is better than drips that you have to sand off. Also, pay close attention to arms, legs, corners or fine features, since that points are prone to drips. Probably it looks stripey at first, but those will get covered as you add extra paint.

Further, darker colors may need more coating than lighter colors. Allow each coat to completely dry, then evaluate if you need to add another.

Takeaway

Doing spray painting is a simple way of achieving a smooth finish on any pieces of furniture. It is eminently correct for furnishings that have complex designs.

Painting using a brush can bring in drips and obvious brush marks, whereas spray paint can produce a near perfect result. So when planning to refurbish your furniture, consider spray-paint if you want a clean and ideal finish. For more of the furniture talks, you can visit Deal Wiki and other home decor websites.

Save The Planet In Style!

By knitting your own phone cover, you are reducing the amount of plastic that ends up in landfill.

We are all looking for small ways in which we can be environmentally friendly, and cutting down on our use of plastics is one of the best ways to do this. When we look at how often we use plastic in our day to day lives, it quickly becomes apparent how incredibly reliant on it we are. While carrier bags, water bottles and other single use plastics are some of the most obvious culprits, things like plastic phone cases are things we can live without too. Instead, protect your smartphone and save the planet with a stylish knitted cover.

Cutting down on plastics

You may think that your phone cover isn’t making too much of an impact on the environment. After all, you don’t buy a new one every week do you? Well, even if you only buy two or three in the space of a year, that soon adds up over the course of, say, five years. With millions of other smartphone users doing the same, it soon becomes clear just how many discarded smartphone covers are ending up in landfill. Ditching these plastic covers is one of the easiest ways to become a more environmentally conscious tech user. All you need to do now is get creative with some Deramores knitting supplies!

Sewing your cover

When you make your own phone or tablet cover, you are in total control of how it looks. With an endless combination of colours and finishes for you to choose from, the only limit is your own creativity. Perhaps you’ll opt for classic monochrome, or go all out with some bold rainbow hues. If you’re looking for some patterns to get you started, then the Tech Covers in Stylecraft Classique Cotton are your best bet. With the patterns showing you how to make a tablet cover, an e-reader cover and a mobile phone cover, you’ll be able to kit out all of your devices in no time at all.

Getting started with knitting is easy

New to knitting and crocheting? Then don’t worry! There are so many online tutorials out there, as well as knitting blogs, books and magazines for you to read through and take inspiration from. Social media is full of knitters keen to show off their creations and expand their knowledge, so don’t be afraid to strike up conversation. If you want to learn with the guidance of a teacher in a group environment, do some research to see if there are any classes being run in your local area. You’ll soon be an expert, however you choose to learn.

A stylish and green option

Knitting your own phone covers won’t just allow you to get in touch with your creative side, but it will help you to lessen the impact you have on the world around you too. Once you have built up your confidence, why not knit some covers to give to your family and friends as gifts? They make great Christmas and birthday presents; and all the while you’ll be improving your skills, which will massively boost your confidence. What’s not to love about that?

tools 498202 1920 e1516414616422

From those that are looking to be a DIY expert or in need of a plumbing professional, there is a set of specific tools that must be brought to every job.

Issues that arise in the household will be found on a regular basis, no matter whether the plumber is based in Regents Park, Mascot or Blacktown.

These will range from drainage issues to clogged toilets, dripping faucets, pipe faults, gas leaks and problems around the bathroom.

By acquiring a select group of tools that every quality plumber will have at their disposal, these ailments can be alleviated with some diligent application.

The saying often goes that a good plumber never blames their tools and with these nine on hand, that is never a scenario that has to be entertained.

Plunger

There are no bells or whistles to the plunger. Simple by design and effective when it comes to the task of unclogging a toilet or sink, the plunger is widely regarded as the number one go-to tool for anyone seeking a smoother path through a drain or pipe.

The plunger has been modernised to some degree over the years, with a Power Plunger available for those blockages that refuse to be budged.

Adjustable Wrench

Versatility is a crucial asset to have when encountering a plumbing problem, given the array of shapes and sizes that will come with various sink, toilet and gas systems within a particular domicile.

An adjustable wrench can adapt to whatever hex-shaped nut is needed to come loose, with the only issue revolving around the jaw. So long as that holds in place, the wrench can tackle most fittings.

Tape Measure

There are some tools that have a timeless quality to them, being adaptable and useful for a variety of problems.

The pocket-sized tape measure is one of those little gems that a plumber can bank on, examining in no time the size of a task up to 100 feet.

Pipe Cutters

Securing a clean cut with a pipe is so important when investigating a plumbing issue.

Creating any additional cuts that expose a pipe will result in all manner of headaches in the medium to long-term and a pipe cutter can operate in tight spaces without much strain required from the user.

Hacksaw

When a clog occurs, sometimes it is necessary to cut directly through to the problem area.

This is where the handyman’s hacksaw pays for itself, opening up plastic and metal pipes, bolts, screws and almost anything that can be cut through the blade. Ensure that the handle holds strong and extra blades are kept on hand.

Inspection Camera

A plumber cannot be expected to be all seeing and knowing when it comes to clogs and leaks in the house.

Sending down an inspection camera will allow the user to see exactly where the source of the problem lies, weaving through any gap with expert efficiency.

Shower Wall Adhesive

Plumbers rely on this for their day-to-day operation, needing a shower wall adhesive to bond linings that can erode in the bathroom.

Various types are available to purchase from department stores, but the best to source are those shower wall adhesives that are waterproof and resistant to heat and steam.

Cordless Drill

Working with electrical equipment around water is clearly an occupational health and safety hazard, so it is integral that a clever and cautious approach is required.

The cordless drill ticks this box and is a fantastic multipurpose piece of equipment to have on hand.

From drilling holes to driving screws, all that is needed to maintain the cordless drill is keeping the battery levels high as it can be picked up and carried anywhere.

Allen Keys

Allen keys are essential to have in the home in spite of any plumbing problem, yet they are very handy when it comes to this domain.

The Allen key, or Hex key as they can be known, applies to a majority of screws that are found to keep showerheads or taps in tact.

They can be purchased in department stores as a set or collection and will be value for money as they are incredibly durable tools.

A 24/7 plumber Sydney can now rest easy knowing they have a basic set of tools at their disposal.

There will be issues that arise in the household that might require something more specialised in this field, but having hold of these will ensure that most plumbing problems can be tackled immediately.

glass 1751210 1920

Glass surrounds us, providing us protection from wind and rain in our homes or cars while allowing us to see what surrounds us outside. There are countless items and things made from glass around the world, and more are created every day.

Glass is made from sand, but we can see through it. It is strong enough to protect us, yet can shatter easily. Despite the fact that glass is a hard surface, it is actually more of a liquid, known as an amorphous solid by scientists. Glass is easy to shape when it is softened and resistant to heat when it sets.

Glass is also completely recyclable, making it one of the most Earth-friendly substances. The versatility of glass allows it to be used in a multitude of ways, some of which you may not even realize.

Bricks

Today, many bricks used for building materials contain recycled glass, but this process has been happening for centuries. As far back as ancient Asia, glass was added to clay for density as well as translucency. Irish Belleek pottery has as much as 50 percent glass and, in the 16th century, Italian Medici porcelains had a significant amount of glass as well. Using glass in bricks reduces the amount of concrete needed as part of the manufacturing process. A reduction of one ton of cement eliminates a significant amount of carbon dioxide from the environment.

Jewelry items made from glass

Many different types of glass are used to create jewelry and it may surprise you to know how many different types of jewelry are actually glass. Glass jewelry isn’t fragile and may not even be delicate. Glass jewelry is made by melting and forming glass into shapes or by layering small pieces of glass together to achieve a pattern. Sea glass is growing in popularity for use in jewelry.

Also known as beach glass, sea glass is formed when a broken piece of glass ends up in the sea. It is then tumbled by waves and sand until the edges are smoothed and the surface becomes opaque. The stunning colors and unique shapes allow artisans to create stunning, one-of-a-kind jewelry.

Recreational Things Made From Glass

Although it isn’t unusual that some recreational items, like glasses, tobacco smoking devices like those offered by Mile High Pipe & Tobacco, or gaming system screens, are made of glass, there are others that you may not realize are actually made from glass or recycled glass. Virtual reality devices, although the screens may feel as if they are plastic, more than likely include some type of glass.

On a recent television show, Sebastian Thrun of Google demonstrated the latest technology from the electronics giant, Project Glass. The latest from Google includes special glasses that project a computer display, using glass and mirrors, onto one eye. It allows you to look things up, send messages by voice and even take pictures by blinking.

Art

Glass has been used in art for centuries, but today’s artists are taking the concept of using glass in their artwork to an entirely new level. Carol Milne incorporates concepts of knitting, mold-making, lost-wax casting as well as kiln-casting to create what she calls Knitted Glass. Karen LaMonte creates cast-glass life-size clothing sculptures created entirely of glass while Dellene Peralta creates sculpted glass shoes.

Cathryn Shilling creates solid glass pieces using a weaving technique that makes the glass look like fabric. Jean-Pierre Canlis creates glass sculptures that look like items found in nature, like cattails or reeds, while Rashad Alakbarov creates what he calls “light paintings,” large installations of colored shards of glass hung in patterns from the ceiling.

These are just a few unique ways that glass is being used today. These ideas go beyond the simple glass window, the drinking glass on your desk, or the windshield of your car.

Difference Between Crystal and Glass

If you’ve ever wondered about the difference between crystal and glass, the answer might be summed up with one word: “fine”.

Traditional glass tends to be less malleable and workable when melted, which means finished pieces tend to be clunkier and thicker.

On the other hand, specific mineral and chemical additions can create a stronger, more malleable material; this can be crafted into thinner, finer, more elegant pieces of tableware and art. But the full answer is a little more complicated, so read on to learn more.

Quick History of the Solid Glass Types

While solid glass ingots and sheets were first produced thousands of years ago in Egypt and Mesopotamia, glassblowing was invented in Syria around 100 BCE, and modern-day glass-blowing materials and equipment such as molds, tubing,and griffin glass tools would still be recognizable to ancient glassmakers.

After the ancient process was imported to Rome, artists continued to hone their craft by experimenting with additives and procedures that would give rise to the product known as “crystal” by the fifteenth century. But describing these types of fine products as “crystal” is something of a misnomer, since true crystal is formed in nature as once-molten material cools and its molecules form a repeating pattern.

As artisans copied and refined this process in their shops over a few thousand years, Italian glassmakers experimented with new additives and created a fine, colorless glass. They named it “cristallo”, and a new luxury product was born.

The primary additive that gave man-made crystal its unique properties was originally lead, but today there are several other alternatives.

Production standards vary globally: UK standards dictate that, for a piece to be considered as fine crystal, it must contain a minimum of 24 percent mineral additives, but there are currently no such stipulations in the US. Below are a few more differences that you’ll find if you’re in the market.

Appearance of glass

Basic, traditional glass will likely have a warm-toned appearance, possibly with a small degree of opacity or dullness. Crystal tends to have a bluish tinge with a greater degree of clarity, as well as a prismatic effect or even a “sparkle” to it.

One can use a pocket blacklight to look at the phosphorescence of the piece; a greenish glow indicates a traditional glass piece, whereas a purplish or bluish hue indicates the presence of additives.

Crystal Resonance

Crystal has a very distinct resonance when tapped gently with a fork or similar metal object, or when you drag a wet finger across the rim.

When lightly tapping a standard glass piece, you may hear a chunkier sound that doesn’t have a ring to it — the sound will be more like a “tink” rather than a “ting”. Crystal pieces have a ring to them and in some cases, they are specifically made to make music.

Price of glass and crystals

You’ll want to perform some due diligence before opening your wallet. If you see a piece that seems more expensive than typical glassware, you might suspect that it’s crystal, though you’ll want to check if the item is in its original packaging.

Care and handling

You might be wondering if crystal is safe for table use. Traditional glass is non-porous and non-reactive, which makes it an excellent candidate for use in dishwashers and food and beverage storage. As these pieces are generally more affordable and perhaps sturdier, they are more suited for everyday use.

Crystal glassware, however, is more porous and therefore not suitable for dishwashers or long-term storage of beverages or food items. It tends to be finer, more delicate, and more expensive, and thus is best reserved for occasional use.

While some kinds of crystal products are lead-free, experts warn against frequent use of leaded-crystal products. And they don’t recommend storing liquids in containers like whiskey decanters for long. Lead antique pieces are best to be admired in a collection, instead.

laminate 2262245 1920

If you are looking for a display for your indoor signs, either at stores or for tradeshows, then a foam board is a very good choice.

It is easier to cut than some of the other materials, and also offers an excellent medium to print anything you want. Below, we look at how to cut a foam board and the various options you have while printing on them.

Cutting The Foam Board

You can easily cut the foam board any way you want. And being lightweight, you will have a much easier time handling them. To cut a foam board, you will need a modeling knife which has a good supply of highly sharpened blades. If you plan to make longer cuts or bends, then consider getting a metal yardstick that can help you with accurately cutting the board. You will also require a strong board which can act as a cutting board. And remember to ensure that the table you are working on remains stable and does not shake while you are cutting the foam board.  

You can even make an entire car out of it!

When everything is in place, take a pencil and mark the areas that need to be cut. Then, take the knife and make your first cut on the top layer of the board. Make sure that you only penetrate the surface of the paper, and not any deeper.

After the first cut has been completed, check it to make sure that it is what you wanted. And once you have confirmed everything is okay, take the blade and make a deeper cut, penetrating the foam board. And while making the cuts, ensure that you only use the sharpened blades. If any blades are dull, change them immediately without wasting time. If you continue to use the dull blades, you may end up tearing the paper.

Foam Board Printing

You have the freedom to choose from a wide variety of foam board printing options.  The most popular include lamination and double side printing. By laminating the foam board, you extend its life, while at the same time adding a high quality feel to the display. And though it will cost extra, lamination is highly recommended if want the display to leave a striking impression on the viewers.

A double sided printing option is useful when you plan on displaying the board to a wide audience that may move on either side of the board. For example, during a tradeshow, it is beneficial to have a double side printed foam board so that everyone can see your display, no matter whether they are located on the back or front of it.

If you have any interest in knowing more about how foam boards can be used for display purposes in your establishment or at an event, consider getting in touch with the nearest foam board printing service.

architecture 1867187 1920

When it comes to your garage, keeping your garage door in a well-functioning manner is indispensable. Due to the frequency of its use, the garage door runs the risk of the constant wear and tear taking a toll on its functioning.

That is why you need to carry out routine maintenance and take appropriate steps when you detect any problem. You may opt to perform the basic maintenance tasks yourself or hire a professional to do the job on your behalf.

But beyond the basic maintenance, it is best to trust a professional to fix the problems and carry out garage door repair jobs. This article provides you information on common garage door maintenance and repair issues.

Routine garage door maintenance checks

By carrying out these routine maintenance checks at regular intervals, you can extend the life of your garage door.

  • Make sure that the door tracks are free from any dent or damage. It is possible to get rid of minor dents by using a rubber hammer. But a major damage to the tracks can require a replacement.
  • Check for the level and alignment of the tracks. If you find any mismatch in the level or alignment, you need to work on them till they become aligned to each other.
  • Ensure to keep the track clean. Clear off any debris accumulated on the tracks with the help of a paintbrush and a household cleaner.
  • Inspect the nuts, bolts, and fasteners. If you find anything loose, tighten it immediately.

Common garage door repair problems

There are some common issues that can arise which are directly related to your garage doors, springs, and openers, such as:

The twisted door

You face the twisted door issue when your garage door does not close completely. This often happens due to the malfunctioning of the mechanism that controls the door’s movement. This problem may require a replacement of the door or some parts of the mechanism.

The blocked door

A blocked door or a jammed door creates problems in opening or closing of your garage door. This issue often occurs due to the malfunctioning of the door springs or the door opener. It can also be caused by a bent track or a damaged cable.

The banging door

When you find that your door closes with a loud bang even when you haven’t used much force, chances are that broken springs are causing the problem.

The open door

It can be quite frustrating to discover that your garage door opens but does not close. A common cause for this problem is a dirty photo eye that prevents the door from closing.

The squeaking door

With a squeaking door, you get to hear squeaking noises when you operate your door. More often than not, the cause of this problem is dry hinges, bearings, and/or rollers.

If you are faced with any of these issues, you should contact an expert garage door service provider, such as the  Garage Door Pros of Ann Arbor; providing repair and installation services of garage doors and openers they will get the job done efficiently. A professional service provider will be able to offer you the best solution and save you future problems related to the issue.