Tag: tiles

roofing tiles 2458515 640
by James Adam

What are Calcium Deposits and How Do You Get It Off Pool Tiles?


Homes

Splashing around in your swimming pool is one of the most luxurious ways to soak up that beneficial summer sun.

It’s a wonderful way to spend a hot day, but it’s difficult to properly relax when calcium deposits coat your pool tiles. These deposits make your pool look dull and dirty, and they’re hard to scrub away. The mineral deposits always seem to come back no matter how much you clean the area.

To ensure your pool looks stunning at all times, keep reading. We’ll go through the reasons why your pool is covered in calcium, and how to get rid of it for good!

How to Recognize Calcium Deposits

Have you ever gone into your pool and noticed flakey white scaling covering your pool tiles? It’s often found on the walls at the waterline and sometimes even in the filter system.

Similar deposits can appear in your bathroom, especially in the toilet bowl, sink, and shower. Any place where water sits and then dries is a potential spot for calcium deposits.

Causes of Excessive Calcium

The cause behind this pool tile menace is an imbalance in your water’s composition. There are three different aspects to your water that affects the mineral deposits left behind.

An imbalance in pH levels, alkalinity, or the hardness of your water means that you’ll remain at risk for calcium deposits until you bring these back to a normal range. The main problem with calcium buildup (besides the way it looks!) is that it can cause damage to your pool system if left alone for too long. Once you realize you have a problem, it’s best to test and adjust your water as soon as possible.

How to Remove Calcium from Pool Tiles

Once you’ve fixed the composition of your water and eliminated the chance for more mineral buildup, it’s time to get rid of the existing deposits staining your tiles.

The easiest way is with calcium remover. This cleaning solution sits on the affected area and bubbles as it works to break up the calcium. After a quick scrub, your tiles look as good as new.

The calcium releaser doesn’t scrape up your tiles and doesn’t affect your water composition, so it’s a great option to have around.

If you prefer to not use any extra chemicals, a pumice stone is your best bet. This volcanic stone works wonders at scrubbing away the calcium without being too abrasive. It does take more effort to get a good result, and you need to be careful to not damage your tiles.

Keep both of these items with your pool gear for the best calcium deposit removal!

Enjoy a Beautiful Pool All Season Long

By understanding the origins of calcium deposits and how to remove them, your pool will always look its best. It makes your swimming adventures far more relaxing when you no longer need to worry about the appearance of your pool.

Once you fix your calcium problem, you’ll spend more time in the water instead of scrubbing the tiles!

For more ways to improve your home, make sure to check out the rest of our blog!


Weekly newsletter

Recent Posts

Visit us on YouTube

Visit us on Google Plus

Visit us on Instagram

Visit us on Pinterest

Visit us on Reddit

Popular Posts

Categories

by James Adam

Best Solution to Remove Hard spots from your tiles


Homes

If you’re tired of seeking brown scum and white patches on tiles, then read out this page and get to know about the best solution that may help to get back your beautiful home with refreshing energy.

Home is precious to everyone. You spend half of your life making your dream home. You keep it clean and maintain with your great efforts, but sometimes these stubborn water spots diminish your house appearance. Most ladies have a complaint about these water spots and you may be shocked to know, every day there are lots of searches made on the internet to know about remedies to get rid of it.  

If you also like us, so do not worry!

We have a perfect and Absolute Floor stripping as a solution for you. As the owner or home minister of your house, it is your responsibility to keep it clean and free from such stains. Maybe you’re doing your best by using various chemicals and other remedies, but results were not that you need.

In the marketplace, there are various methods out there, but most of them use chemicals. These are good to see instant results, but these damages tiles and make it rough and sometimes ugly. And I am sure you don’t want it.

So, what is the solution?

The bathroom is the place where most of the water hard spots appear. The reasons are quite common such as running a tap, use of the shower, and not cleaned properly. Well, there are multiple ways to clean your tiles easily and smartly with kitchen ingredients. Here, I will discuss only 3 of the best methods with you, which I use and observe great results much better than branded products.

  1. White Vinegar

It is a common kitchen ingredient used in almost all kitchens of India especially. It is also a safe and cleaning ingredient that has earned great status than another cleaner available in the market. This can be used for cleaning the mirror, bathroom tiles, and other hard stains. Also, this is a perfect ingredient to prevent the formation of germs and harmful pesticides in the house.

White vinegar will help you to eliminate hard spots from tiles immediately. On the consistent use, you’ll see the great results. Don’t worry it never affects the tile quality.

To prepare this solution you need white vinegar and water in the 50/50 ratio. Take a spray bottle and add 1 cup of vinegar and 1 cup of water in it. Mist it well and spray it on the surfaces of tile or mirror. Moreover, you can use this spray for removing stains from washbasin, shink, and other items.  Or if the water spots are stubborn and you have not cleaned it for a long time, then add a little pinch of baking soda in white vinegar, the results would amaze you.

  1. Salt

Salt is a basic element that uses to add taste in food, but now you can also use this for removing stains and hard water spots from tiles and floor. It removes stubborn stains quickly as much as you use. This also kills bad bacteria, germs, and odors in the bathroom.

Before using salt, make sure tiles are completely wet. Sprinkle some salt on tiles ad leave it for an hour. After that scrub the tiles and wash it off. The longer you’ll keep salt on tiles you’ll get the best results.

  1. Borax

It is a natural chemical agent that is a great option that you may consider to remove hard water stains from the tiles. This has high alkaline, which is influential to remove stains. To use this remedy, mix borax with one cup of gallon water. Spray it on tiles and after a few minutes scrub it off using a sponge or soft brush.

These are basic and yet influential components proved by many households. The regular use can help and prevent the hard water stains for a long time.

Amazing tips which you should follow to confiscate stubborn stains

  • Build a schedule to wash your bathroom regularly with basic ingredients.
  • Try to clean water marks thoroughly so they will never come as a headache for you.
  • To keep the bathroom more refresh and clean try to use wash bathroom with warm water once in a week.
  • Adapt a habit of mopping a bathroom after every bath.
  • Try to keep your bathroom well cleaned, maintained, and soaked.
  • Forget about using chemicals or harsh products, use kitchen ingredients which are safe, effective, and in your budget.

Final words

In the house, the bathroom plays an important role in the impression of your guests. The well-maintained and clean bathroom reveals your personality that how much you’re caring. Right now, it’s time to get rid of stains. What do you think? Apply out given tips and enjoy stress- free visiting.

by Incredible Planet Staff

Four tips to Choosing the right Colour Tiles in your home


Homes

When choosing a colour scheme for you home there are a number of things to consider. From lighting, to room size and theme to material, redecorating can feel like an unachievable task at times. But fear not, decorating is a fun experience when you know the basic tips and tricks. With that in mind, lets take a look at how you can choose the right colour tiles for your home.

Research

Tiles are just as important as any other feature within a room. Just like wall paint or wallpaper, tiles help to create a strong base from which you can create the rest of the look you are trying to achieve. Because of this, its always a good idea to do plenty of research before shopping for your new tiles.

Looking in to the aesthetic that you are going for, or just general design ideas, will massively help to reduce the time you have to spend trawling through tile samples and web pages.

Property

Its easy to get swept up with designs and motifs when redecorating but its just as important to take in to consideration the style of your property. If you live in a modern new build home, traditional victorian tiles might look a little out of place. Similarly, modern tiles might seem odd in some period homes. Striking the balance of old and new is a hard one, but look at other homes for inspiration when working with homes that have a clear time period to their structure.

Room size

It goes without saying that the size of the room will affect the type of tile you choose. Small rooms that have little access to natural light aren’t going to suit darker tiles. Instead, in small bathrooms for example, use white bathroom tiles to help open up the space. Larger rooms are far more forgiving for those maximalist styles, so use this to you full advantage and make the most of those richer colours where possible.

Colour

We’ve briefly touched on it but when it comes to colours, there are three basic schemes to work by which are tonal, harmonious and complementary. Tonal schemes use the same colour in varying shades to create depth to a room. Tonal coloured tiles are great for natural, softer looks. Harmonious colours focus on using two colours that are close to each other on the colour wheel. For example, purple and blue or yellow and orange. These colours work well together naturally with no effort at all on your part so are ideal for contemporary designs. Finally, complementary colours are colours that are opposite each other on the colour wheel, like pink and green. The contrast works well together and can give really strong, bold looks. Ultimately, the colour is of course up to you and your tastes, but these general colour principles are good to work by.